(11) To change date and time of the system CHA-DATE: YEAR= MONTH= DAY= HOUR= MINUTE= SECOND=Ĥ-digit year 2-digit month 2-digit date 2-digit hour in 24 Hr. (10) To display date and time of the system DIS-DATE NOTE: Locking PIN and Mobile PIN are different feature but both the codes are same
#SIEMENS HIPATH 3800 CHANGE TIME CODE#
To add the locking code / PIN for an extensionĪDD-PERSI: TYPE=STN STNO= NAME= ORG= PINC= COSXCD=Įxtension Number Do not give anything here Do not give anything here Do not give anything here Give four digit PIN number OR DIS-PERSI: TYPE=PIN PIN= the PINs entered in the system. See all - Best Selling in Other Telecom Systems. 30-day return policy Expedited Shipping Available Location DS S Tote 12 ' See all Item description. The flexibility of Siemens HiPath 3800 is especially obvious. ' Siemens Magnetek HiPath 3800 LUNA 2 Power Supply S30122-X7686-M1 3D53-18-1 Clean operating condition. This guarantees gradual migration on both the network side and user side. The system is ideal for both packet-switched (LAN/WAN) and line-switched (ISDN) environments, or a mixture of the two. To see the particular / all locking code(s) programmed in the systemĭIS-PERSI: TYPE=STN STN= the PINs entered in the system.Įnter the Extension number or omit to see all Siemens HiPath 3800 is a secure, reliable communications system with high failure tolerance. If you do not give any number, then system will list all the names entered in the system (7) To see the name for a particular or all extensions DIS-PERSI: TYPE=NAME STNO= Here if you give an extension number, the system Will provide the name for that extension. (6) To Activate an extension ACT-DSSU: ONTYPE=AUL TYPE=STNO STNO= (5) To Deactivate an extension DEA-DSSU: OFFTYPE=DI TYPE=STNO STNO= Note : for digital extensions the SCSU command is replaced by SBCSU. ,DIAL=DTMF (For Tone instrument) DP (For Pulse instrument) To change the dialing type (DTMF/PULSE) for analog phone only. Since 2017 they are no longer supported by Siemens. (1)ĬHA-SCSU: STNO= DPLN= ITR= COS1= COS2= LCOSV1= LCOSV2= (3)Įxtension Number Day time Class of Service Night time/after locking Class of Service Day time Least Cost Routing COS Night time/after locking Least Cost Routing COS The Siemens HiPath 3000 PBX telephone systems in 2016 became end of life. The lower window is to enter commands & the output can be seen in the upper window. The screen is now divided in two windows.
This “>” is the command prompt to enter a valid command. The LOGON message followed by “>” sign will appear on the screen. or press LOGON key.(Green color.) LOGIN PASSW Siemens Hipath 4000 required Commands Below is a personal document of Manish Kumar Sahdev and should not be downloaded and used without prior permission.Īfter opening COMWIN, press “Ctrl + T”.
0 kommentar(er)
